Note for Guidance
The Fire Safety Advice Centre
Health and Safety (Safety Signs and Signals Regulations) 1996.
Introduction
These Regulations brought into force the EC Safety Signs Directive 92/58/EEC on the provision and use of safety signs. The safety signs directive was adopted by all European Union member states on 24 June 1992, which recognised the need for all workplaces to have easily recognisable signs and symbols relating to safety matters and encourage the standardisation of safety signs throughout the member states of the European Union so that safety signs, wherever they are seen, have the same meaning. In this country, the Directive has been implemented through the Health and Safety (Safety Signs and Signals Regulations) 1996. These regulations apply to all places of work covered by the Health and Safety at work etc Act 1974.
The Regulations cover various means of communicating health and safety information. These include the use of illuminated signs, hand and acoustic signals, eg fire alarms, spoken communication and the marking of pipe work containing dangerous substances. These are in addition to traditional signboards such as prohibition and warning signs. Fire safety signs, ie signs for fire exits and fire-fighting equipment are also covered.
They require employers to provide specific safety signs whenever there is a risk that has not been avoided or controlled by other means, eg engineering controls and safe systems of work. Where a safety sign would not help to reduce that risk, or where the risk is not significant, there is no need to provide a sign. The regulations, where necessary, require the use of road traffic signs within workplaces to regulate road traffic and also require employers to maintain the safety signs which are provided by them, explain unfamiliar signs to their employees and tell them what they need to do when they see a safety sign.
The Regulations apply to all places and activities where people are employed, but exclude signs and labels used in connection with the supply of substances, products and equipment or the transport of dangerous goods.
Categories of safety signs
Safety signs are divided into categories according to the type of message they are intended to convey. Each category is assigned a specific format and set of colours.
Prohibition Signs
These signs should he used to convey "Do Not" type commands For example, to indicate that smoking is not allowed or that, where a particular material reacts dangerously with water or water should not be used to extinguish a fire. In the workplace they should be used to reinforce instructions prohibiting dangerous activities. Such instructions, however, should also form part of the employees training. Signs prohibiting an activity consist of a circular red band and single diagonal cross bar descending from left to right at an angle of 45 degrees. The background should be white with the pictogram indicating the nature of the command in black.
Warning Signs
These signs should be used to make people aware of a nearby danger. For example, a flammable liquid store or a laboratory where radioactive substances are in use should have an appropriate warning sign near the entrance. These signs are required by the Health and Safety (Safety Signs and Signals) Regulations 1996 and in specific cases by the Dangerous Substances (Notification and Marking of Sites) Regulations 1990. Signs warning of a particular hazard consist of a black band in the shape of an equilateral triangle. The background within the band should be yellow with the pictogram indicating the type of hazard in black positioned centrally on the sign.
Mandatory Signs
These signs should he used to indicate actions that must be carried
out in order to comply with statutory requirements. For example self-closing
fire doors that must be kept closed to comply with the fire risk assessment
should be labeled with "FIRE DOOR KEEP SHUT" signs. An area
of a construction site where hard hats should be worn should also have
appropriate signs at the entry points. It should he noted that the Health
and Safety (Safety Signs and Signals) Regulations 1996 do not apply to
mandatory fire instructions but do apply to health and safety mandatory
signs where pictograms are required. The minimum regulatory requirement
is for the sign to include an appropriate pictogram, There are no pictograms
for fire safety instruction signs and although mandatory in the UK through
inclusion in the requirements of workplace fire assessments, such signs
are not considered as health and safety signs within these Regulations.
Thus the familiar white on blue fire safety mandatory signs using text
only will remain in place and will not have to be changed.
Fire instruction notices, that is notices which list actions that occupants
must carry out in the event of a fire are, by convention, written as white
text on a blue background but not in the circular format. The colour's
are used to convey the mandatory nature of the instructions but because
of the amount of text normally needed a rectangular format is used. The
general mandatory sign of a white exclamation mark on a blue circle may
be used in conjunction with a fire instructions notice.
Signs indicating mandatory requirements consist of a blue circle with
the pictogram or text in white positioned centrally.
Safe Condition Signs
These signs should he used to indicate escape routes, emergency exits, first aid equipment, emergency showers and the like. Safe condition signs consist of a green rectangle or square with the pictogram or text in white positioned centrally. In the same way as for mandatory signs some UK fire safety signs in this category are not required by the Health and Safety (Safety Signs and Signals) Regulations 1996. For example "PUSH BAR TO OPEN" is not required to comply and there is no pictogram with that meaning. Such signs are still needed for compliance with other UK legislation.
Exit Signs
In order to comply with the requirements of the Building Regulations, every doorway or other exit providing access to a means of escape, other than exits in ordinary use, should be provided with an exit sign. Installation of signs conforming to British Standard 5499: Part 4: 2000 will satisfy both the Building Regulations and the Health and Safety (Safety Signs and Signals Regulations) 1996. In general these Regulations will not require any changes where existing fire safety signs containing symbols comply with BS 5499: Part 4 : 2000 Fire safety signs, notices and graphic symbols. This is because the signs in BS 5499, although different in detail to those specified in the Regulations, follow the same basic pattern and are therefore considered to comply with the Regulations.
Provision of exit signs
The regulations place a duty on employers to ensure that safety signs are provided in circumstances where the risk to the health and safety of employees, identified through the risk assessment requirement contained with the Management of Health and Safety at Work Regulations 1992 cannot be entirely, engineered or managed out of the workplace. It should be noted that the Regulations do not require safety signs to be used where there are no significant risks to the health and safety of employees. The issue which then requires to be resolved is whether it is necessary to indicate exits with signs. In arriving at a decision the fundamental issue which will underpin the process is whether the risk of injury or death to employees from a fire within a particular premises is deemed to be significant enough to warrant the provision of signs indicating fire exit routes and final exits. If it is deemed that the risk is not significant then there is no need to install the signs. Thus, for example, a small, single storey premises with one clearly visible exit should not require a fire exit sign because it would be obvious to staff that the door is their only means of access/egress and hence there should not be a significant risk to their health and safety from fire by not signing the door as an exit. However, those buildings with more complex internal layouts incorporating multiple exits, some of which may not be readily visible nor frequently used, or where large numbers of the public congregate, will require fire exit signs. They should be complete with directional arrows, if there is a significant risk of individuals not being able to find their way to a place of safety in the event of a fire.
Supplementary information signs
These are signs used to provide additional information. In the Health
and Safety (Safety Signs and Signals) Regulations 1996 these are confined
to directional arrows. However BS 5499 : Part 4 : 2000 includes various
text messages as well as arrows under the description of supplementary
signs. To comply with the Regulations where a direction indication is
needed the minimum requirement is for a supplementary sign in the form
of an arrow. The supplementary text messages in the British Standard such
as "Water as an extinguishing agent prohibited" will be acceptable
under the regulations only if accompanied by an appropriate pictogram.
This is entirely consistent with the philosophy of the British Standard.
Supplementary signs consist of a square or rectangle in the appropriate
colour with the pictogram or text in white and positioned centrally. The
colour should be green where the information supplements a safe condition
sign, red where It supplements a fire equipment sign or yellow to supplement
a warning sign.
There is a minor conflict between the British Standard and the regulations
on the permitted colour of supplementary signs. BS 5499: Part 4: 2000
allows text to be in black on a white background or white on the appropriate
colour. The colour alternative is the only option permitted in the Regulations.
Thus the Regulations can be complied with by adhering to this option in
the Standard.
Illumination of signs
Exit signs should be legible at all material times. In premises where emergency lighting has been considered necessary for means of escape purposes such signs should be illuminated by the emergency lighting supply in the event of a failure of the normal lighting. Any of the following methods are considered suitable,- lamps external to the sign but providing adequate illumination of it,
- lamps contained within the sign, internally illuminated signs,
- Self luminous signs requiring no external power source.
Reference should be made to the British Standards where appropriate.
Photoluminescent Signs
The visible areas of these signs are manufactured from Photoluminescent
materials. These materials contain chemicals that are able in absorb and
store energy from daylight or artificial lighting. When the source of
energy is removed the chemicals are able to release the energy in the
form of light. Several companies produce Photoluminescent signs with pictograms
complying with these regulations although the colours may not exactly
match the specifications within the regulations. The properties of these
signs make them useful to supplement normal signs in some situations.
For example, they perform well as signs under the reduced light levels
provided by emergency escape lighting operating on failure of the normal
supply. There is no objection to the use of this material to supplement
emergency lighting, but it is not acceptable to use it as an alternative
to emergency lighting. This type of material is often used in strips at
low level to highlight the contours of escape routes. The same material
also finds a use in wayfinding systems.
Photoluminescent systems should be installed in compliance with the Code
of Practice for the installation in Premises of Emergency Way-finding
Guidance Systems, Produced from Photoluminescent Materials, Safety Signs
and Markers. This Code is published by the Photoluminescent Safety Products
Association. As yet there is no appropriate British Standard for these
systems.
Fire Fighting Equipment Signs
These signs are used to mark the location of fire fighting equipment
and fire alarm activation points. However, where possible, fire equipment
should be positioned where it is clearly visible. Red to be used as the
identifying colour for fire fighting equipment. If the equipment itself
is red this will satisfy the requirement. Where it is not red then highlighting
the position of fire fighting equipment by colouring background behind
the equipment red may be enough to comply.
Fire equipment signs consist of a red rectangle or square with the pictogram
in white positioned centrally on the sign.
Provision of fire fighting equipment signs
The same general process outlined above is applicable to this section.
Again it is assumed that because there is a possibility of a fire occurring
in the premises then fire fighting equipment will be needed. Whether this
equipment also requires to be identified by means of a sign will depend
on the physical environment in which the fire risk assessment takes place.
In other words the features of the workplace, the activities carried on
there and any other circumstances deemed to be pertinent must be taken
into account. For example, in a building where the internal layout is
such that the extinguishers provided are clearly visible to employees
there should not be a requirement to further indicate the position of
the fire fighting equipment with a sign, or by colouring the background
red.
Alternatively, in more complex building layouts, for example where it
is not always possible to ensure that fire extinguishers are in the line
of sight of employees, for example due to the nature of the work process
or where hose reels are installed within cabinets or where fire fighting
equipment is contained within recessed fire points then it would be pertinent
to provide signs indicating the position of the equipment complete with
directional arrows where applicable. It is important to highlight that
the process by which a decision is reached regarding the necessity or
otherwise of providing fire fighting equipment signs should be based on
whether a significant risk exists as a consequence of the particular location
of such equipment. If it is deemed that a significant risk does not exist
then there is no requirement to provide the signs.
Summary of Safety Signs
The pictograms are as shown in the regulations and the completed sign must be in accordance with the appropriate colours.
Type |
Shape |
Colour | Pictograms |
| PROHIBITION SIGNS These signs prohibit actions detrimental to safety No Smoking |
Circular | RED with a white background red band and crossbar. |  |
| WARNING SIGNS These signs give warning of potential risks Triangular |
Triangular | YELLOW with black symbol or text |  |
| MANDATORY SIGNS Signs that require actions or activities that will contribute towards safety |
Circular | BLUE with symbol or text in white |  |
| SAFE CONDITION SIGNS These signs indicate exit routes in the event of a fire or emergency |
Rectangular | GREEN with white symbol or text |  |
| FIRE EQUIPMENT SIGNS These signs are used to indicate the location of fire equipment |
Rectangular or Circle | Red with white symbols or text |  |
| Supplementary Information Signs | Rectangular | Green, Red, Yellow, with White or Black Text |  |
Fire warning systems
Where evacuation from buildings is needed, the Regulations require the fire alarm signal to be continuous. Fire alarms conforming to BS 5839: Part 1:1988 Fire detection and alarm systems for buildings do not need changing, nor do other acceptable means such as manually operated sounders, eg rotary gongs or hand bells.
Pictograms
The regulations require all signs should use graphic symbols or pictographs to convey its message but it does not prohibit the use of supplementary text. It indicates the intrinsic features required and some are indicated below,
- The shape and colours of signboards are set out, in accordance with their specific object (signboards indicating a prohibition, a warning, a mandatory action, an escape route, an emergency or fire-fighting equipment).
- Pictograms must be as simple as possible and should contain only essential details.
- The pictograms used may be slightly different from or more detailed, provided that they convey the same meaning and that no difference or adaptation obscures the meaning.
- The dimensions and colorimetric and photometric features of signboards must be such that they can be easily seen and understood.
It also illustrates a list of single pictograms that should be used except for exit signs where the five below are shown.
| . |
 |
 |
|
 |
 |
As the result of this flexibility there are at least two exit signs available in the UK and there could be more throughout the EC. Because of this the EC directive 92/58 has failed in its principle aim to have common standard throughout the member states.
General Advice
If, following the fire risk assessment, it is deemed necessary to provide any fire safety signs then they should comply with the Regulations which details the colour, maintenance regime and general advice associated with the provision and use of safety signs in general. It is also deemed fire safety signs which comply with BS 5499 and ISO 7010 meet the requirements of regulations. Fire safety signs deemed not to be acceptable are those which contain text only information therefore such signs should no longer be used. However in the case of existing premises where such text only signs are already in place and the risk assessment determines they are necessary, employers will have to replace them or supplement them with the appropriate pictograms.
Further information
This link provides a copy of the legislation - The Health and Safety (Safety Signs and Signals) Regulations 1996
This link is guidance from the HSE on the above legislation - Signpost to the Health and Safety (Safety Signs and Signals) Regulations
Advice on the use of fire safety signs can be in the Guidance documents for business
An excellent reference handbook for fire safety signs is produced by
the Fire Protection Association.
Guide to Fire Safety Signs - FSB36 - ISBN 0 902167 87-1 : £5.00.
F.P.A. Publications Dept, Melrose Ave, Borehamwood, Herts, WD6 2B : Tel
0181 207 2345 : Fax 0181 207 6305
See the detailed guidance Safety signs and signals: Guidance on Regulations - The Health and Safety (Safety Signs and Signals) Regulations 1996 HSE Books, 1996 ISBN 0717608700 £8.50
British Standards are available from : BSI Sales and Customer Services, 389 Chiswick High Road, Chiswick, London W4 4AL : Tel: 0181 996 7000, Fax: 0181 996 7001
HSE priced and free publications are available by mail order from : HSE Books, PO Box 1999, Sudbury, Suffolk CO10 6FS : Tel: 01787 881165 Fax: 01787 313995
HSE priced publications are also available from good booksellers.
Other enquiries should be directed to HSE's Information Centre, Broad Lane, Sheffield S3 7HQ : Tel: 0114 2892345 Fax: 0114 2892333
This page contains notes on good practice which may not compulsory but which you may find helpful in considering what you need to do.
This handout provides a general overview and basic information on this topic. It may not apply to everyone, consequently to find out if this guide applies to you and to get more information on this subject, study all the relevant legislation, guides and British/European Standards. Also you should seek advice from an expert on the subject or your local Fire Safety Officer or Fire Safety Professional.
Merseyside Fire Liaison Panel. Permission is granted to print and photocopy this material for nonprofit educational uses.
[Index] [Advice Centre]
This page was last checked and modified on Saturday, 22 March, 2008 22:41
